How do I configure my iCT220/250 terminal's network settings?

How do I configure my iCT220/250 terminal's network settings?

Step 1. To return to the home screen, press Clear (red button). 

Step 2. Press .;#* (punctuation key).

Step 3. Type the admin password, then press Enter (green button). The default password is 1234567F.

Step 4. Press (Setup menu), then press (Communication). 

Step 5. Press 3 (Ethernet), followed by (TerminalSetup), then press 2 (Static IP).

Step 6. Configure the terminal's static IP information:

  • To enter the terminal's IP address:

  a. Press (TerminalIP).

  b. Using the keypad, type the IP address.

  c. Press Enter (green button).

  • To enter the terminal's gateway IP address:

  a. Press (GatewayIP).

  b. Using the keypad, type the gateway IP address.

  c. Press Enter (green button).

  • To enter the terminal's IP subnet mask:

  a. Press (IPSubMask).

  b. Using the keypad, type the subnet mask.

  c. Press Enter (green button).

  • To enter the terminal's primary DNS IP address:

  a. Press (PriDNSIP).

  b. Using the keypad, type the primary DNS IP address.

  c. Press Enter (green button).

  • To enter the terminal's secondary DNS IP address:

  a. Press (SecDNSIP).

  b. Using the keypad, type the secondary DNS IP address.

  c. Press Enter (green button).

Step 7. Press Clear (red button). The terminal reboots.

Modified on: Wed, 27 Feb, 2019 at 4:45 AM