How do I connect my VX520 terminal to an Ethernet network?

How do I connect my VX520 terminal to an Ethernet network?

Accessing the connection ports

Step 1. Turn the VX520 upside-down

Step 2. Remove the rear cover as shown to view the connection ports.

Removing the rear cover from the VX520 device.

Connecting the Ethernet cable to the terminal

Step 1. Connect one end of the Ethernet cable to the ETH port on the terminal.

Step 2. Connect the other end to an available port on your router or switch.

An Ethernet cable connecting to the Ethernet port of the VX520 device.

Powering the terminal

Step 1. Connect the round end of the power cord into the power port on the bottom of the terminal.

Step 2. Plug the adapter into a power socket

The power cord connecting to the power port on the VX520.

Tidying the cords

Step 1. Run all cords in the terminal over the back of the device.

Step 2. Attach the rear cover.

Related articles

How do I switch from dial-up to IP communication on my VX520?
How do I switch from IP to dial-up communication on my VX520?
How do I connect my VX520 terminal to a phone line to use a dial-up connection?